self aligning ball bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.
- 25 mm x 52 mm x 18 mm NACHI 2205K self aligning ball bearings
- No
- 1.024 Inch | 26 Mill
- 110 mm x 240 mm x 80 mm NSK 2322 self aligning ball bearings
- KIMBALL MIDWEST
- KIMBALL MIDWEST
- 80 mm x 170 mm x 39 mm NSK 1316 self aligning ball bearings
- 4.055 Inch | 103 Mil
- Bearing
- ISO 11206 self aligning ball bearings
- DODGE
- Mounted Units &
- 80 mm x 170 mm x 39 mm ISO 1316K self aligning ball bearings
- PEER BEARING CO.
- M06110
- 70 mm x 150 mm x 51 mm ISO 2314 self aligning ball bearings
- ASAHI BEARINGS
- 0808250464128
- Toyana 1320K self aligning ball bearings
- 0.0
- C0-Medium
- Toyana 2316 self aligning ball bearings
- DODGE
- 0.0