self aligning ball bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.
- 30 mm x 62 mm x 20 mm ISB 2206 KTN9 self aligning ball bearings
- Holes on Outer Ring
- N/A
- 75 mm x 130 mm x 31 mm ISB 2215 KTN9 self aligning ball bearings
- 3.328 Inch | 84.531
- 2 Bolt Pillow Block;
- ISB TSM 12-01 BB-E self aligning ball bearings
- Mounted Units &
- M06110
- 25 mm x 42 mm x 20 mm ISB GE 25 BBL self aligning ball bearings
- 160 mm
- Double-Row Non-Fill
- ISB TSF 16 BB-O self aligning ball bearings
- 31171501
- 6.8
- 40 mm x 80 mm x 23 mm FAG 2208-TVH self aligning ball bearings
- 0.0
- FAG BEARING
- 80 mm x 170 mm x 39 mm FAG 1316-K-M-C3 self aligning ball bearings
- HM129848-90012
- 90012
- 100 mm x 215 mm x 47 mm FAG 1320-K-M-C3 self aligning ball bearings
- LL575349-902A3
- 0.0
- 45 mm x 100 mm x 25 mm FAG 1309-K-TVH-C3 self aligning ball bearings
- 0.1
- BEARINGS LIMITED
- 10 mm x 30 mm x 9 mm NACHI 1200 self aligning ball bearings
- Single Row
- IKO