AMERICAN NTN BEARING LTD

tapered roller bearings

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

40 mm x 90 mm x 23 mm SNR 30308A tapered roller bearings: Designation of housing : P205-; H2 : 70 mm

90 mm x 150 mm x 45 mm SNR 33118A tapered roller bearings: Designation of housing : FA205N-; N : 12mm

50 mm x 90 mm x 20 mm NKE 30210 tapered roller bearings: Special Configurations Code : No; Precision Grade Symbol : No

110 mm x 200 mm x 53 mm NKE 32222 tapered roller bearings: e : 24 mm; T min. : -20 °C

45 mm x 75 mm x 22 mm NKE IKOS045 tapered roller bearings: C : 25.7 kN; A1 : 14 mm

80 mm x 125 mm x 36 mm NKE 33016 tapered roller bearings: Bearing Used : Deep Groove Ball Bea; Housing Material : [Aluminum Alloy] 201

75 mm x 130 mm x 41 mm NKE 33215 tapered roller bearings: Surface Treatment : No; Unit Body Material : Cast Iron

90 mm x 190 mm x 43 mm NKE 31318-DF tapered roller bearings: T min. : -40 °C; Weight : 1.03 kg

25 mm x 52 mm x 22 mm NKE 33205 tapered roller bearings: Temperature Properties : Standard; B : 89

160 mm x 290 mm x 48 mm NKE 30232 tapered roller bearings: N1 : 21 mm; d : 31.75 mm

AST HM801346/HM801310 tapered roller bearings: Housing Material : [Aluminum Alloy] 201; Bearing Retained : Yes (with retaining

34,925 mm x 65,088 mm x 14,605 mm ISB LM48548/510 tapered roller bearings: d1 : 51.1 mm; L : 129 mm