AMERICAN NTN BEARING LTD

angular contact ball bearings

Angular Contact Ball Bearings. Angular contact ball bearings support both radial and axial loads through asymmetric races that house the bearing's spherical rolling elements, also called bearing balls, on an angle. The deeper the angle between the bearing and its axis.

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.An angular contact bearing is a type of specialty ball bearing used in many manufacturing and industrial applications. This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.Angular Contact Ball Bearings. Angular contact bearings from Grainger can support combined loads simultaneously in radial and axial directions. Use them for high-speed, high-precision applications, such as turbines and dentistry equipment, where dual-direction loads are present.

35 mm x 80 mm x 34,9 mm FAG 3307-BD-2HRS-TVH angular contact ball bearings: r : 4 mm; Basic dynamic load rating (C) : 143 kN

110 mm x 170 mm x 28 mm FAG HCB7022-E-T-P4S angular contact ball bearings: Bearing number : SFRW6ZZ; Material : Martensitic Stainles

15 mm x 42 mm x 19 mm FAG 3302-BD-TVH angular contact ball bearings: d : 45 mm; Size (mm) : 15 mm x 42 mm x 19 mm

130 mm x 230 mm x 40 mm FAG HCB7226-C-T-P4S angular contact ball bearings: N : 4,3 mm; Bore Diameter (mm) : 12

42 mm x 82 mm x 37 mm FAG FW9242 angular contact ball bearings: Bore Diameter (mm) : 1000; C : 236 mm

70 mm x 125 mm x 39,7 mm FAG 3214-B-TVH angular contact ball bearings: Dynamic load rating axial (C) : 2,223 kN; B : 18 mm

10 mm x 26 mm x 8 mm FAG HCS7000-C-T-P4S angular contact ball bearings: Size (mm) : 10 mm x 26 mm x 8 mm; D : 75 mm

35 mm x 55 mm x 10 mm FAG HSS71907-E-T-P4S angular contact ball bearings: Size (mm) : 35 mm x 55 mm x 10 mm; Width (mm) : 20

45 mm x 75 mm x 16 mm FAG HCS7009-C-T-P4S angular contact ball bearings: Calculation factor (e) : 0.42; ra(max) : 1.5

60 mm x 85 mm x 13 mm FAG HCB71912-C-T-P4S angular contact ball bearings: G1 - Heat Generation Factor (Roller-Raceway) : 20.7; Design Units : Imperial

INA F-83737 angular contact ball bearings: Bearing number : 7901 A5; da min. : 14,5 mm

50 mm x 80 mm x 16 mm NACHI 7010CDT angular contact ball bearings: Bore Diameter (mm) : 320; (Grease) Lubrication Speed : 842 r/min